EROSION AND SEDIMENT CONTROL PLAN

Erosion And Sediment Control Plan (ESCP) is a plan that details temporary measures that will be implemented during the construction phase and may include permanent measures that will remain in place once development is complete to control the environmental impacts of erosion and sedimentation.

It is important that Erosion And Sediment Control Plan is effective in preventing illicit discharge. Careful examination of the specific project site during project design to identify potential problems posed by slope, drainage patterns, and soil types is important in preparing an effective erosion and sediment control plan.

Erosion And Sediment Control Plan as part of the plan set with the planning and/or building permit application submittal. For projects including those requiring a Grading Permit, separate erosion and sediment control plans are required to show the measures to be implemented at the grading stage (e.g., grading, foundation/retaining walls) and at the construction stage of the project.

The plan shall show what Best Management Practices (BMPs) will be used, when, and where, specific to the project scope, along with the total disturbance area and installation details and notes for the proposed BMPs. Measures include those necessary to delineate areas of work/disturbance, prevent erosion of unstable or denuded areas, plan for construction staging and storage logistics, construction of stabilized access points, and proper containment measures for construction materials and waste.

Erosion and Sediment Control Plan shall show:

• Boundary lines of the site.
• Limits of disturbed areas.
• Existing drainage patterns and direction of flow.
• Accurate contours showing the topography of the existing ground. The contour lines shall be at intervals sufficient to show the configuration of the ground before disturbance.
• The location of all existing buildings, structures, easements, or underground utilities.
• Concrete Washout
• Fiber Rolls
• Geotextiles and Mats
• Inlet Protection
• Silt Fence
• Stabilized Construction Entrance
• Stockpile
• Tree Protection

If you are keen to find out more about how our firm can work with you to complete your Erosion And Sediment Control Plan, contact us today. You can fill out our online form or contact us via contact@civiloutsourcing.com. When cost-effectiveness and quick turnaround are important, and quality cannot be sacrificed, turn to Civiloutsourcing.com services for Erosion And Sediment Control Plan.

Contact us:

Email: contact@civiloutsourcing.com

Website: https://civiloutsourcing.com/

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

Source: https://civiloutsourcing.com/erosion-and-sediment-control-plan/

Using Data Shortcuts in AutoCAD Civil 3D

Data Shortcuts are a great way to share Civil 3D Design objects with the rest of the team. Civil 3D Data Shortcuts are stored in a _Shortcuts folder that is created when project is setup. The Data Shortcut objects are then used as references in other drawings, but those objects can only be modified in the source drawing where the objects were originally created. Data Shortcuts are managed using the Prospector Tab in the Toolspace under the Data Shortcuts collection, or in the Manage tab>Data Shortcuts panel.

There are two types of Civil 3D Projects. Single-design drawing projects and multiple drawings projects which share data using Data Shortcuts. It is up to the designer or project manager to understand the workflow of the project and know when it is a good idea to use which of the available data sharing methods.

For example, you have a site project and you need the following drawings for the construction plan set:

Existing Conditions – You will need an existing surface

Grading plan- You will need existing and proposed surface

Plan and Profile- You will need existing and proposed surfaces, alignments and pipe networks

Since the existing and proposed surfaces are being referenced in more than one drawing, this would be an example of when using the Data Shortcut instead of recreating the surfaces would be beneficial. This also allows other users on the team to create references to Surfaces, Corridors, Sections, etc.

Civil 3D objects that can be shared in the Data Shortcut folder include:

Surface

Alignments

Profiles

Pipe Networks

Pressure Pipe Networks

Corridors

Opening the source drawing can be easily by picking on the object and right-mouse clicking to open the menu, where there is an option to Open Source Drawing.

As the designer makes modifications to the objects, the team with receive Update Notifications through the AutoCAD Civil 3d interface and the notifications will include the following modifier icons:

 The Object is out of date and needs to be rebuilt, or is violating specific design constraints

  The Object is referenced by another object. In the Settings tab this also indicates that a style is in use in a currently open-drawing.

The object is being referenced by another drawing file (a Data Shortcut or by an Autodesk Vault reference)

To update the Shortcut data, select Synchronize on the bottom right  Synchronize, or you can right-click on the object in the Prospector and select Synchronize

There are several benefits to using Data Shortcuts if used correctly, they can optimize your workflow, minimize the size of your drawings and make it simple to collaborate with your design team.

By Gari Lynn Hessong | Applications Expert

Source: https://civiloutsourcing.com/using-data-shortcuts-in-autocad-civil-3d/

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

PLAN SET CREATION USING SHEET SET MANAGER

One of the most time-consuming parts of any project is the initial files setup. When you begin a new job, you need to determine the appropriate sheet size, scale, and orientation of your drawings before you can do anything. Then, you’ll need to create the actual plans, create and insert title blocks for each, add viewports, general notes, bar scales, legends and a half dozen other items for each individual type of plan.

This is all billable time since you’re doing it for your project, but it’s not a cost-efficient use of your billable hours. Initial setup of a twenty drawing project can take a full day of your CAD staff’s time. Each subsequent drawing you add can take an additional hour or more. Do the math on the cost to set up a 100+ drawing set and you can see how quickly budgets can be chewed up, and you haven’t even begun the design yet.

Using Sheet Set Manager to Set Up Projects:

Wouldn’t it be nice if there was a way to simplify and automate the setup process? That’s where AutoCAD’s ​Sheet Set Manager (SSM) comes in. SSM has been around for a long time but not a lot of firms make use of it and those that do aren’t making full use of its functionality.

How Sheet Set Manager Works:

The idea behind SSM is simple; it’s nothing more than a tool palette that resides on the side of your screen with links to all the drawings in your set. Each link in the SSM palette lets you open, plot, change properties, even rename and renumber all the drawings in your set. Each link connects to the layout space of an individual drawing saved to your project. SSM can link to multiple layout tabs within a single drawing as well, but it’s not the best method to work with. The simplest and most flexible, way to work with SSM is to separate your design model and plotted sheets into distinct drawings. Essentially, you’re splitting model space and paper space into separate files. This way, you can have one drafter working the design model, while another is modifying the sheet layout.

For example, if you add three more detail sheets to your set you don’t have to go into each one and update the total sheet number, you can simply change the “9” to a “12” in the SSM properties and it updates all plans in the set. It works the same way for all the properties listed above. You add new links via right-click, choosing either an entirely new drawing or to link to the layout of an existing file. The SSM list above was created from scratch in under two minutes.

By James Coppinger,

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

DESIGNING AND DRAFTING LAND DEVELOPMENT SERVICES

Land development design requires site analysis and civil engineering site design drawings like site layout, road design, road profiles, pipe profiles, and infrastructure improvements for both residential and commercial projects.

Every land development project requires appropriate land development plan and drafting. Design, CAD drafting, changes as feedback from the owner and the government may take a lot of time and human resources. So should you outsource designing and drafting land development project to outsourcing services?

Outsourcing to land development design services from a quality partner to get designing and drafting support from drafting site plans from sketches, set up plan sheets to detailed design including:

• Cover Sheet & General Notes
• Site Plan
• Grading Plan
• Existing Conditions Plan
• Demolition Plan
• Erosion and Sediment Control Plan
• Stormwater Management Plan
• BMP Plan
• Utility Plan and Profiles
• Road and Pipe Profiles
• Sight Distance Plan and Profiles
• Landscape Plan
• State and County Standard Details
• Department of Transportation (DOT) Details

Moreover, Outsourcing providers can help you with grading modeling, utility network such as Storm Drainage, Sanitary Serwer, Water.

To get those advantages, your partner must work with a quality working process so your design and functional requirements are executed being consistent with the owner’s specific requirement and CAD drafting standards. You will also get extra advantages when outsourcing works including:

• Having more time with your clients -> deeply understand their ideas -> at least change
• Working on multiple projects at the same time
• Getting projects completed faster
• Saving cost
• (Especially) having more time for planning long term strategies for your business and building new client network.

We civiloutsourcing.com have successfully completed several land development projects using Autocad, Civil 3D so if you need more helpful information about outsourcing services in Civil engineering do not hesitate to contact us.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

Source: https://civiloutsourcing.com/designing-and-drafting-land-development-services/

PARKING LOT DESIGN AND DRAFTING SERVICES

You are an engineering consulting firm or working on this field. You consider parking lot design is one part of your services or just have projects that need to be done with a parking lot. After for a time, you realize that you need someone who can save your time in this part of the design.

With our experiences in engineering and CAD drafting services, we confidently understand that a well-designed, well-maintained parking lot helps people get in efficiently, find their way to a stall, walk safely to the door, and get back out unscathed. Key elements designers keep in mind when designing a parking lot include entry and exit spacing, aesthetics, Americans with disabilities act compliance, snow removal, minimizing property damage, pavement management plans, pedestrian friendliness and so on.

Normally, you or members of your team need to brainstorm to figure out the good ideas then show them on site plan along with a lot of rules as listed above and more specific requirements from clients. After that, you sit down in front of the PC to draw them on then have a meeting with client to get feedback and have a lot of more things to do to get a project to be done on schedule. They may take much of your time or your company resources.

Just thinking about what you must do and what you can outsource to others as an engineering and CAD drafting services provider. We deeply understand your situations. Each project needs to be on schedule, save cost, spend the least resources from human, technology, working places. And the most important thing is client satisfaction. Because we are a client-focused firm, we understand that each client has a different need.

Our engineers have been well-equipped with updated parking design regulations. We are familiar with the experience and hands-on knowledge of Qcode policies and procedures to assure the most effective solutions for projects. Our team applies design software including 2D Autocad, Vehicle Tracking and Auto Turn.

Outsource parking design to CivilOutsourcing.com, We help you run your projects from preliminary to the endpoint. You just need time to review and give us feedback such as specific requirements from clients. That’s a way you have more time to meet existing clients and expand new customer network. Take advantage of engineering outsourcing services that are the trend of the day.

If you are keen to find out more about how our firm can support to you to complete your projects, contact us today. You can fill in our online form or contact us via contact@civiloutsourcing.com. As long as cost-effectiveness and quick turnaround are important for you, while quality is sure to be crucial must, you should think about Civiloutsourcing.com services for Civil Engineering And CAD Drafting Services.

Source: https://civiloutsourcing.com/parking-lot-designs-services/

AUTOCAD DRAFTING AND CONVERSION SERVICES

Digital drawing is the most sufficient tool to manage documents in our projects. Digital drawings can be modified and inserted to other drawings quickly with highly precise, dimensionally accurate AutoCAD files. Otherwise, digital drawings improve the ability to exchange and share the data with partners.

Civil Engineering And Design companies regularly use or have to use PDF files, images instead of Autocad files. There are discomfort and difficulties in quality, alteration, and addition.

For example: In implementing a project, details or sections need to be inserted to the planset but you just have PDF files, images that may be collected from the internet, your clients, or your library. Then PDF files, images are inserted directly to drawings. After that, you would get the planset that is less professional and looks messy. That is the considerable reason for Civil Engineering And Design company to decide to convert PDF files, images into AutoCAD files. Autocad drawing is a permanent solution since the drawings can be used many times or a part of them can be modified to match specific requirements on each project.

To convert PDF files or images to digital drawings, we need to build a drafting team or relocate existing human resources for the job. If so, we would have to pay more operation cost for hiring employees, working place, hardware, software, and a lot of more things.

If you are wondering how to deal with the issues above. Don’t worry, you can outsource them to AutoCAD Drafting And Conversion Services which providing solutions to solve your works related to AutoCAD including:

– PDF, paper to CAD.

– Image to CAD.

– Hand sketch to CAD.

– Scanned drawing to CAD.

– CAD redrafting.

Benefits of Outsourcing to AutoCAD Drafting and Conversion Services:

– Reduce human resource cost.

– Save working office cost.

– Save money from infrastructure investments.

– Quick turnaround time.

– High-quality drawings with accuracy in dimensions.

Especially, AutoCAD Drafting and Conversion Services allow you to use engineering resources whenever you need and only pay whenever you have projects.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

Source:https://civiloutsourcing.com/autocad-drafting-and-conversion-services/

ROADWAY DESIGN AND CAD DRAFTING SERVICES

Roadway design requires you to deal with constraints, specific requirements and subtasks such as techniques (maintenance of traffic, utility relocations, environmental permits, drainage needs, and the latest regulations); budget; schedule… At the same time, you have to take time for meetings, visiting construction site, sitting down in front of PC to draw layout, model, calculate, set up plan, CAD drafting and a lot of more things. In this case, some of them you need to do by yourself but some not necessarily done by yourself so why don’t you think about outsourcing them? Outsourcing roadway design and cad drafting services provider can help you.

We provide services for urban, rural, primary, secondary, and interstate roadways for clients ranging from municipalities and DOTs to private developers. We are well-equipped to address any task related to roadway design, including interchange and intersection geometrics, utility relocations, retaining walls, and related features.

Our civil engineering teams apply innovative designs to the delivery of long-term sustainable solutions for construction of new roads and streets in urban and rural environments, as well as widening and improving existing roads and highways. The scope of our expertise extends to conceptual studies, preliminary engineering, and detailed design of rural and urban highways, arterial streets, and neighborhood streets.

Our engineers have extensive experience in transportation engineering, roadway design for both public and private sector clients. Our staff can provide design services for any size project, from widening projects to roundabouts to interchange designs. We are familiar with the experience and hands-on knowledge of DOT policies and procedures to assure the most effective solutions for projects.

We deliver design solutions using state-of-the-art design software, including AutoCAD, Civil 3D, Vehicle Tracking, Infraworks.

We can assist you in your roadway engineering projects including conversion of your PDF drawings to CAD, CAD drafting, detail sections, C3D modeling, set up plansheet. Our experienced and knowledgeable draftmans and engineers have proven to be an invaluable asset to clients.

 Roadway Engineering and CAD Drafting Services:

• Roadway and sidewalk Designs
• Intersection Improvement Plans
• Parking Lot Design
• Paper to CAD Conversion
• Road Improvements
• Utility Design
• Drainage Design
• Erosion Control
• Grading Plans
• Section details
• Earthwork Estimates and Quantities

Our team of engineers and drafters have experience in providing full range of outsourcing CAD Services from planning and design implementation at unmatched level of flexibility. We listen to what our clients have to say and we don’t make promises that we can not keep. We strive to exceed in project delivery through responsive communication, interactive processes and a complete focus on the design.

Trained by licensed Professional Engineers (PE), our staff is well equipped with latest design trends to assist you on all types of Commercial, Institutional, Educational, Residential projects. CivilOutsourcing.com also provides utility design, and CAD drafting for road designs. We are familiar with all requirements for site design, erosion and sediment control plans. To ensure quality in our work, we have a checklist that needs to be signed by our engineers working on projects to make sure all items have been taken care before sending the final files to clients. Outsource your drafting for Roadway Engineering projects to CivilOutsourcing.com and take advantage of our experience.

For more useful information please do not hesitate to contact us.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam.

Source:https://civiloutsourcing.com/roadway-design-and-cad-drafting-services/

HOW DO WE START CIVIL ENGINEERING AND DRAFTING SERVICES

We would like to ensure you that it’s easy to connect, work and build a quality partnership in Civil Engineering and Drafting Services at CivilOutsourcing.com.

We have a strict and proven workflow to deliver our services with perfect quality and reasonable cost includes the following steps:

1. Determine The Scope Of Work:

Our team will define the scope of work, get the client’s goal on each project.

2. Understand The Input Information

Our team will analyze input and discuss with clients to understand the requirement clearly including styles, standards, samples.

3. Project Allocation

the project manager will set up a team and resources to meet the client’s specific requirements.

4.Execution & Extra Input

Create an output based on the input brief. We may need to ask for extra information as necessary.

5. Preliminary Delivery & Collecting Feedback

The preliminary result will be delivered to clients and we would like to get feedback from you at this stage.

6. Correct & Change

Correct errors based on feedback. Quality check is run again following the changes.

7. Final Delivery

CivilOutsourcing.com strive to exceed client expectations. We have clearly proven quality management process, we consistently seek to get our QA system, delivery process, methodologies, and customer services aligned with international standards. Detailed process and constructive feedback help us easily figure out similar problems in the next projects and implement innovative design solutions to gain faster delivery time and improve the quality index.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam

Source: https://civiloutsourcing.com/how-do-we-start-civil-engineering-and-drafting-services/

QUALITY OF CIVIL ENGINEERING AND DRAFTING OUTSOURCING SERVICES

Quality is always a core factor in any service. Especially, in civil engineering outsourcing services, output quality is considered to be the most important concern. As long as we-clients feel assured about the quality, it is quite certain that we are willing to develop a quality partnership. However, output quality is never completely satisfying. Why is that? We would like to show you 5 factors affecting output quality in civil engineering outsourcing services.

1. Poor communication:

Most clients are quite busy with their schedule so you do not have enough time to show all pieces of ideas to the outsourcing team. As a consequence, the outsourcing team is misunderstood or miss some parts of ideas from you. To deal with this problem, our solution is we always discuss more details with our clients so that we can deeply understand their ideas, their goals on each project. We ask to gather the related information, extra data, etc. We also have technical meetings, training on regularly to improve communication skill.

2. Quality control:

Having been working for many years in outsourcing services, we realize that the majority of errors happen because the outsourcing company lacks quality check processes. This is an important stage in the working process of civil engineering and drafting services. We strictly implement your standards and requirements so that we can assure you that no project is delivered without a thorough check of quality. Your satisfaction is our happiness since this is clearly a win-win situation.

3. Delay:

Any delay of delivery would increase project cost, and put customers in an irritating situation of not having enough time to review or prepare for meetings with clients, or submit a plan to the government. So time advantage is a big huge for the success of an enterprise. To deal with the delay of time, we constantly follow the deadline, still keep good quality, but we want to make sure we deliver projects on time. Our working process always follows well-planned schedules, this leads to the consistent workflow that minimizes delay while keeping the expected quality.

4. Experience and knowledge:

We have built our knowledge bank over a period of several years from our experience in working with clients across the globe. We also build a unique library for each client include standards, design regulations,  common notes. We are not only working on your tasks but also building your great standards so that our co-operation could become more productive.

5. Technology:

Technology is a key factor to make great services. We always look for and apply innovative solutions to suit each of our client’s unique projects, and that leads to better communication. We are then able to implement the most cost-effective and creative solution while maintaining compliance with all applicable rules and regulations.

We have been working in civil engineering and drafting services for many years so we deeply understand your concerns with the quality of outsourcing services. Civiloutsourcing.com is committed to serving our clients with a creative yet practical approach to every project. Since we determine ourselves as a client-focused firm. We look forward to working with you on your projects, regardless of the size or scope.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam

Source:https://civiloutsourcing.com/quality-of-civil-engineering-and-drafting-outsourcing-services/

HOW WE CONTROL OUTPUT QUALITY IN CIVIL ENGINEERING OUTSOURCING SERVICES

With our 5 years of expertise in engineering outsourcing services, our team of engineers uses the latest software and technology so that we are able to deliver accurate and efficient solutions with a faster turnaround time at the most affordable rates.

We constantly strive to optimize our level of quality and increase productivity so that our clients can achieve their business goals in a shorter time while reducing their operational cost. To be more specific, we would like to show you how we control output quality in civil engineering outsourcing services.

We will begin the outsourcing process with our carefully designed workflow, which ensures that we deliver perfectly quality services in time and at a reasonable cost. The workflow includes four steps: Project Planning, Process Definition, Execution and Design Verification.

Step 1: In the project planning stage, we will gather information and determine the scope of the project, set the milestone dates, decide on a mode of communication, set up the engineering team.

Step 2: The process definition stage begins with an in-depth analysis of the customer’s requirements. The project is then allocated to the team, headed by an experienced project manager who signs off the input documents and then sets the team’s milestones.

Step 3: The execution stage includes regular quality checks, peer reviews, and external/ internal milestone reviews. Our team will regularly communicate with the customer and ask for extra inputs. The stage will end with an internal sign-off on the work.

Step 4: The last stage is called the design verification stage, where the quality of work will be checked by an independent reviewer, and corrections (if any) will be made. The project will again go through a final internal sign-off and then be sent to the customer for review and feedback.

Quality is the very essence of our services.

When you outsource your engineering requirements to us, we can guarantee you the perfect quality of our work.

All of our engineering employees are given intensive training on quality standards before they start work on a project. Our engineering professionals ensure that premium quality is strictly maintained at every step in the process.

We follow clearly defined detailing and conversion processes. We have adopted best-in-class quality management models and adhere to international quality standards.

We follow an established project planning and control model to ensure that we always complete assignments ahead of schedule.

With our extensive exposure to international engineering projects across diverse domains, we are able to provide services of the highest quality.

Our engineering team works with the latest software, such as AutoCAD, Civil 3D, Imfraworks, Google Earth, GIS, AutoLISP, Visual LISP, Microstation, Bluebeam, AutoCAD MAP, Map Info and ABS to create engineering solutions that are accurate and precise.

At CivilOutsourcing.com, we always put an enormous amount of effort into everything we do, from communicating, to planning, to execution. We believe that your satisfaction is the key to good business for both your company and us.

Source:https://civiloutsourcing.com/how-we-control-output-quality-in-civil-engineering-outsourcing-services/

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam

CAD DRAFTING SERVICES IN VIETNAM

CAD Drafting Outsourcing Services allow you to use engineering resources whenever you need and only pay whenever you have projects. You will get 100% productivity for each hour you pay for so you should consider outsourcing your business to a cad drafting outsourcing provider is always a wise choice at this moment.

Outsourcing your Cad drafting tasks will increase productivity, save time, complete projects in a shorter time, do multiple projects at the same time. You also have more time to focus on core values in your business while saving much more money.

We have successfully completed a range of drafting and designing projects such as industrial design, home design, architectural design. We also can work from your freehand sketches, convert to cad from photos, pdf, tiff and that’s the way you can reduce much of your project cost.

Our draftsmens are highly qualified and are very proficient in using the latest technologies to any type of drafting to global clients. We are also experts in converting hand sketches and scan documents to cad as per international standards, layers and text styles per your standard.

We provide well-executed drafting services that carried out by a team with good understanding and strict process. The process would be included in 4 steps:

Step 1:

– Understand the requirements.

– Gather information and determine the scope of work.

– Set the deadline.

– Set up the drafting team.

Step 2:

– Execute the work.

– Communicate with clients and ask for extra inputs.

Step 3:

– Check the quality of work.

– Correct details. (if there is any).

Step 4:

-Delivery and revision

We always proudly tell our customers about the process we design, about our quality manpower, and about our passion in what we do. Outsourcing your work to us, we can guarantee you, your satisfaction.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam

Source: https://civiloutsourcing.com/cad-drafting-services-in-vietnam/

THE DISADVANTAGE OF CIVIL ENGINEERING OUTSOURCING SERVICES

1. Problems with quality:

This will happen if the outsourcing providers do not have a strict process or are inexperienced in working on an outsourcing partnership. To deal with that we have a dedicated quality assurance team who will identify key parameters with high quality. These quality parameters are based on the individual customer requirements and expectations such as styles, working rules, standard. A quality process is designed to ensure that high quality is achieved in these parameters.

2. Not giving 100% time and attention to your business:

Since the outsourcing providers work with a wide range of clients so they normally do not give 100% time and attention to a single company. This may result in delays and inaccuracies in the work output. To avoid this matter we will make a separate team who only work on a single partner with a team leader. A team leader will be trained as a key person who deeply understanding your ideas, styles and specific desires.

3. The risks of losing sensitive data and confidential information:

This is the most important term when deciding to open a new partnership with the outsourcing provider. Your concerns will be addressed by signing a confidential agreement, using back up systems, security network.

4. Poor communication:

Languages and cultures are barriers to a partnership. Luckily, This is not a big problem for us. We are a quality team who have been worked as engineers for overseas companies in America, Australia, deeply understand a variety of cultures, good at English in both speaking and writing.

CivilOutsourcing.com deeply understand your concerns about the disadvantages of Civil Engineering Outsourcing Services and always find the best solutions to make us become the quality partnership in the long journey. Also, there are many benefits that outsourcing brings that far outweigh its disadvantages.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam

Source: https://civiloutsourcing.com/the-disadvantage-of-civil-engineering-outsourcing-services/

INFORMATION SECURITY AND CONFIDENTIAL ASSURANCE

Do you concern about data security while choosing a Civil Outsourcing provider?

Most of our clients require a high level of data security before deciding to sign a contract. We understand the importance of information security and confidential assurance in outsourcing services.

We have been working over 5 years in Civil Engineering Outsourcing Services and receive the same questions related to data security regularly. So We would like to share with you how we protect your data at CivilOutsoucing.com.

1. Data sharing:

– Only authorized employees are allowed to use and share data and only for work purpose. At CivilOutsourcing.com strictly prohibited sharing information, source files to the third party.

– We sign confidential agreements between your business and our company, between our company and all of our employees before starting the project.

– We do not public any information related to project such as C3D model, Plan sets, your company information, your clients on Website or any social network.

-Our transcription employees are not allowed to bring in or take out any paper, printout or written documents

2. Network security:

– Workstations and networks are secured by anti-virus, anti-malware, anti-phishing, spam blockers, URL filters, and other standard protections.

– We disable all the external drives in the systems at CivilOutsourcing.com.

– At the same time, any measure necessary to protect your data will be applied

3. Technology:

– Login is protected by the 2-factor authentication.

– Regular system auditing.

– Using the latest anti-virus program for all single PC.

-Centralized backing management.

– We conduct technical evaluations following our standardized to ensure that all the systems in our office meet the necessary security agreements.

– We use authorized software only for our computers.

Contact us:

Email: contact@civiloutsourcing.com

Website: civiloutsourcing.com

Phone: +84 90-601-3469

Address: 537/39, Nguyen Oanh Street, Go Vap District, Ho Chi Minh City, Vietnam